CineSlide Mount kits are all based on the Bosch-Rexroth aluminum structural framing system. This system is a highly flexible system with a wide array of components for interconnection. There are hundreds of ways to use and construct mounting systems from the Bosch framing. Techht provides the Bosch system in custom black anodize, in kit form to address the most common mounting arrangements. We have also manufactured our own components to compliment the Bosch-Rexroth system for the CineSlide.

For situations not addressed here including unusual ceiling structures, or particularly long drops, you can contact us for suggestions.

The CineSlide is a Machine typically moving a relatively heavy, expensive lens. It is NOT suitable for mounting onto a typical projector post mount in addition to the projector. Projector mounts are designed to hold the projector they are made for and nothing else. Particularly not something that moves. The CineSlide must be mounted to a structural element, typically ceiling joists. DO NOTattach the CineSlide to drywall only. The motion loads induced by a lens transport will eventually work a drywall mount loose and could result in a dangerous failure. Installation should be done by a qualified installer. Consult your architect or structural engineer for any atypical mounting arrangements prior to doing them. There are several mount points available on a CineSlide. A qualified engineer or architect may be able to design a suitable, safe mount that can attach to these mount points, but we do not recommend doing so without professional advise.

Mounting a CineSlide properly may require above average installation skills. Locating of structural elements/joists, locationof wiring, proper alignment and use of hand or power tools may all be required. While we have gone to great lengths to provide a mount system that is both flexible and affordable, it still requires what we consider above average installation skills to do safely and properly.

See the Options Link for photos of some mount kits

$90

$90

$90

$110

$130

TBQ

$159

$199

$159

$49

$159

Isco III Lens with NEW Multistand II lens mount - The premier, best anamorphic lens made. Ground glass 4 cylindrical element, adjustable astigmatism, precision optical lens. This lens is suitable for use with all projectors.
Price may fluctuate up or down with availability and Euro Exchange rate.

Lens Lock Mod -(OLDER ISCOSTAT 9 MOUNT ONLY,
not required on new Multistand II )
This modification provides a lock for the lens rotation and is required for best performance on older mounts.

Isco IIIS. This is the new IscoIIIS lens. It is NOT like the old Isco II. This lens is constructed with the same type of 4 Cylindrical elements like the Isco III, only this lens is smaller. This lens may be used with projectors with smaller panel sizes. Available Summer 2008

CineMount-T - TABLETOP Mount. See mounts above for CineSlide Mount. Schneider Cine-Digitar 1.33 Anamorphic (#14954224) fully adjustable 2-post mount. Tabletop (non-CineSlide) mount. Free conversion to CineSlide mount with future purchase of CineSlide.

SALES POLICIES

Prices do not include shipping. Actual shipping charges apply. FedEx ground preferred shipping method, other methods available by request (extra charges may apply).

No returns without prior approval. Returns will require a Return Authorization Number (RAN). RAN must be clearly marked on the shipping label and on the outside of the box. Due to the custom nature of this product, any return is subject to a restocking fee of 20%. No returns are accepted after 30 days. Lenses are subject to 30% restocking fee. No returns accepted on coupon purchases. Any returns must be uninstalled, unused product. Returns of used product is generally not allowed, contact us for details.